How Do you Perform a New Construction Cleaning?

 

What is a new construction cleaning? It's simply a deep clean of a newly constructed home or business. It might seem odd to you to see everything appearing fresh and new. It is a way to remove all dirt or grime prior to their set in. This can help ensure that your investment is protected by making sure there are no stains on the floor or the paint for instance. This also ensures that surfaces are shielded against future damage like rusting metal trim on windowsills and doorjambs, which could happen if unchecked.

 

Cleaning Materials Required

 

Vacuum cleaner:  to remove any fine dust particles left by woodworking tools like jointers and table saws. To eliminate all chalk lines, dust, and any remaining sealant, use the vacuum. Clean windowsills, stairs, and edges of baseboards. After you are finished you can sweep the floor once more to get rid of any dust.

Broom, dustpan, and brush: Pick up sawdust and other particles that have accumulated in corners or difficult-to-reach places. Clean up any debris, such as sawdust.

Baking Soda: Baking soda is ideal for eliminating smells on any surface. It also helps neutralize the smells that emanate from sealants, paints, or staining used in the process of new construction cleaning. Sprinkle baking soda on damp floors and scrub with a mop.

Bleach: Bleach is a great cleaner that kills mildew and mold. It is crucial to use the correct amount of bleach. In excess, bleach could result in skin irritations. Bleach is also excellent for eliminating soap scum and grease stains that are left on tiles following new construction cleaning.

Sponge: Use a bucket of warm, soapy water to wash the sponges well before you employ them. Make use of sponges to clean up build-up adhesive and dirt. It can be applied to doors and cabinets and other surfaces.

Polish: Polish is a technique to eliminate fingerprints and dirt from newly painted walls. Make a paste of baking soda and water, and then polish the cabinets, appliances as well as tiles, and other fixtures.

Make use of a mop, bucket, or squeegee: clean the flooring. Vacuum it. Clean the windows' sides and doors with a squeegee to pull out the water. Clean up any excess water with mops dipped in soap and warm water. Make sure to use the squeegee so as to avoid leaving water streaks on floors, walls, as well as other surfaces.

Dust cloths: Use dust cloths to clean windows, mirrors, and other flat surfaces. Dust cloths can be used for small items that are too delicate to be cleaned with a sponge, mop, or mop.

Rubber gloves: Use cleaning agents with rubber gloves to prevent your hands from becoming affected. Also, ensure that you don't let any chemical residues on your skin.

Protective equipment: Protect your eyes from dirt and dust by wearing latex gloves, rubber boots or goggles. Additionally, wear a dust mask as well as earplugs to block out any sound that could be too loud for your ears.

 

Do it Yourself

 

You don't require expensive equipment. Follow these steps to get your new construction site neat and tidy.

First, check your windows to make sure they're properly sealed and do not have any cracks. If there are cracks in the frame or glass, you will need to replace it as soon as possible because water could get in and cause mold growth. Also, if there is metal trim that runs around the outside of the windows, like sill plates and doorjambs on exterior doors, inspect them for signs of rusting from moisture damage. Remove the trim and paint it with Rust-Oleum Filler Primer. These surfaces should be kept clean and protected from corrosion from moisture trapped beneath objects such as wood sills/jambs. This can lead to rot.

In the next step, you'll need to examine the doors for any gaps or cracks along their edges, where air could get in and cause loss of energy over time. Also, you should examine the floor underneath the door to make sure there is no gap between the threshold and the door. You can use a caulk gun or non-hardening weather sealing agents to fill in the gaps using silicone-based glue. Inspect all entrances into your building or home, including windows that are outside and internal sliding glass doors as well as the front entryway. Repeat the process on both sides of all windows. Then, test each doorway by closing them with a tight seal. If you are able to still squeeze your finger through the cracks then you must seal it up.

Next, check with all exterior painted surfaces for any chips or nicks that could lead to spots of rust later on. Make use of a putty knife or a non-hardening spray to apply touch-up paint when needed. Make sure that there aren't any seams between sheetrock sheets; they should be first filled with joint compound, followed by painting with primer or paint. Make sure that all flooring, carpeted or tiled, a thorough clean with an industrial vacuum cleaner, such as the shop vac. After they've been cleaned, check each for any damage like loose grout or nicked edges. Utilize a putty knife apply a spackle (or non-hardening weather sealant) on these areas and let it dry for up to 24 hours prior to applying the last coat of paint.

Next, inspect the walls both inside and outside for any smudges or scratches that could cause discoloration later on the path. Make use of a damp cloth to get rid of dust particles. Then, clean the entire surface using primer or paint by using an angle brush. Be sure to pay attention not just to the baseboards, but also around doorknobs/fixtures, which are high-traffic places where dirt can be stuck. It is essential that the color of your primer match closely to avoid any noticeable differences once walls are painted.

After that, examine the floors that are carpeted or tiled for any damage or cracks which could result in loose tiles. If required, apply a putty knife to repaint (or non-hardening weather sealant) as well as damaged tiles, then allow it to dry overnight prior to painting using a primer or paint with a bent brush. Clean your vents both inside and outside of your home. This will stop insects from nesting and will keep them clean. Also, make sure you protect your AC unit with plastic sheeting until it is ready for the final inspection. This is important because it might harm your unit if it is left uncovered prior.

It's also a good idea to cover the entire exterior of the building with sheets of plastic prior to an inspection. It's possible to do this using large sheets that are secured with tape along seams and then placed over the protected area. Don't use duct tape as it could cause damage to siding or brick. After you are done, place cones all-around your home or building, and then wait for the inspector's report. If you require repairs take the sheeting material off of the bottom. Once everything is done and you are able to get access to underneath. Be sure to keep everyone out of the way prior to getting the windows or doors; otherwise, they may be injured by nails sticking from scaffolding planks!

 

Tips on How to Clean Dust from New Construction

 

If you're faced with cleaning a new building, you must know the right techniques. If you need help here is a list of tips that should give you all the required details!

 

- Remove all debris from each room. Clean and mop flooring and tiles first before moving onto carpeted areas to ensure they don't get saturated to clean later in this procedure. For easier vacuuming dust from walls and other tight places where dirt can build up, make sure you have a hose attachment.

 

- Then, you can move on to clean windowsills, sills above doors/windows, or any window panes which appear to have visible dust. This is a vital step to clean new constructions. If you do not clean windowsills or other surfaces, dust will get accumulated over time.

 

- Once you've completed these steps, apply an all-purpose cleaner along with microfiber or paper towels to scrub the walls. Dry them out quickly. If you need to, use water in small sections throughout the entire process to ensure that you don't oversaturate carpets with too much prior to cleaning them later in this process after your walls have been completely dry from the excess water that has poured into them during the cleaning process the process itself.

 

- When you are done, take out the vacuum again and walk around the room, sucking up debris from each carpeted section. If your floors are dirty it is possible to go over them once more for an added clean-up effect prior to moving onto the next stage of the process which is cleaning the windows from any build-up dust.

 

- Once you have completed all of the steps above You'll be prepared to mop your floors a second time to ensure they are tidy and make sure there's not any dust that remains over the floors.

 

- Make sure everything is dry before you move onto clothes or personal items in each room so as not to ruin anything through contact with excessive moisture that may still be left on carpets after this process has been completed. This is not in line with the purpose of new construction cleaning.

 

If you do not have the time to tidy, consider hiring NW Maids because we are not just experienced, but we can also provide their expertise. Check our online reviews this is the most effective way to find a reliable firm. Visit or call us to inquire about their offerings and determine whether you're a great match.

 

Contact NW Maids to learn more. https://nwmaids.com

 

Contact the NW Maids Tacoma location:

NW Maids Tacoma Cleaning Service

2367 Tacoma Avenue South

Tacoma, Washington 98402

(253) 793-1664

https://nwmaids.com/locations/tacoma

https://www.google.com/maps?cid=13687882319685200525